Drone 1.0 from DGCA

Flying drones(UAS) in controlled or uncontrolled Airspace is prohibited for public in India and it will be same till 1st Dec 2018.  DGCA, the authority responsible for controlling air traffic in Indian airspace drafted a set of rule in 2016 and again in 2017 modified and published as a draft only.  On 27th August 2018 they published the first set of rules for controlling drones  allowing public to fly drones with permission.They have published 3 document related to this. These rule will be effective from 1st December 2018. Here i am listing the major points.

  • No rule for Hobby, DIY, Self-made drones seems not allowed. Getting clearance for DIY or non branded drone will be complex or near to impossible.
  • Currently none of the drones available in market compliant with the NPNT , the OEM need to integrate these things. NPNT is necessary for all drones which need UIN. Nano drones are exempted from UIN but still with conditions.
  • If you flying Inside a building still you need permission
  • For agriculture scanning/imaging is OK but spraying is not allowed till now.
  • Delivery is not allowed, so don’t expect amazon will send their drones to you.
  • Flying a nano drone in your friends marriage is not easy. You can fly it in your garden without any licences but not in a marriage.
  • Pilot licenses are valid for 5 years costs 25000/- and all other papers
  • UIN registraion is like RC not transferable costs
  • RPA operated by NTRO, ARC, and Central Intelligence Agencies are all free they can do whatever they want without or with permit.
  • NPNT compliant drone will not fly until it gets permission via digital sky platform app. Once flying request accepted it will be transmitted to drone via GSM will enabled for the requested flight.

Drone Classification

  1. Nano Drone : Less than equal to 250 gram
  2. Micro Drone : Greater than 250 gram less than or equal to 2 kg
  3. Small Drone : Greater than 2 K.G. less than or equal to 25 kg
  4. Medium Drone : Greater than 25 KG less than or equal to 150 kg
  5. Large Drone : Greater than 150 kg

UIN

UIN(Unique Identification Number) is equivalent to vehicle number in normal vehicles. Its needed for all drone above Nano. But in some case you need UIN for Nano too. If you are flying nano drone in a friends party then you need UIN. The UIN need to engraved on the vehicle or attached to vehicle and should be clearly visible. UIN fee is INR1000/-

UAOP

Unmanned Aircraft Operator permit is needed for flying all drones except nano and micro drones in uncontrolled airspace(or inside a building) with a limit of 50 feet and 200 feet respectively.  Getting UAOP for first time costs INR 25000/- valid for 5 years and renewal costs INR 10000/-

Flying drone upto 400 ft. AGL and visual line of sight are allowed. However, you need to have the following equipment installed on your drones:

  • GNSS (GPS) for horizontal and vertical position fixing
  • Autonomous Flight Termination System or Return Home (RH) option
  • Flashing anti-collision strobe lights
  • RFID and GSM SIM Card/ NPNT compliant for APP based real time tracking
  • Fire resistant identification plate inscribed with UIN
  • Flight Controller with flight data logging capacity.
  • SSR transponder (Mode ‘C’ or ‘S’) or ADS-B OUT equipment h) Barometric equipment with capability for remote sub-scale setting i) Geo-fencing capability j) Detect and Avoid capability (compulsory for indian manufacturers)

 

Here they have mentioned the upper limit but didn’t mentioned limit at which one can fly without these equipments. NPNT device is neceassary as per their policy that is clear but the SSR transponder will be costly. They have specified manufacturers are permitted only if they mount all of these devices.

 

The DGCA Documents

  1. RPAS FAQ
  2. Do’s and Don’ts
  3. REquirements for manufacturer pilot and done

Published by

ASIM MAHAKUL

Hello, I am Asim admin of this blog. An expert in Scientific Instrumentation (Analytical Instrumentation). My works are always associated with both Physics and electronics. Currently working on ARM based embedded systems for Optical(UV and Visible) and electrochemical spectroscopy (EIS). My M.Tech. Thesis was related to all these things. I had worked for a 8 bit microcontroller based standalone EIS (electrical impedance spectroscopy) device. I have Masters in Instrumentation engineering from NIT Kurukshetra,Haryana and Masters in Electronics Science from Sambalpur University, Odisha (Formerly Orissa/Utkal) Am also work for PHP MySQL AJAX based CMS design. i love blogging and coding(am not an expert).

One thought on “Drone 1.0 from DGCA”

Leave a Reply