AVR Mk-II for Aurduino and back to AVRStudio

Drivers in desktop operating systems are not so simple as the embedded drivers, some times it take hours to solve the driver issues specially with the USB Debuggers.

Few Days back i was using arduino for low power applications, so excluded all the supporting components like programmers, UART link and used AVR ISP MkII for programming. But  arduino(open source program) use libusb(opensource) where as avrstudio(copyrighted) use jungo(propietory) for usb interface. And this needs the mkII driver to be changed to libusb. mkii will be a libusb device and in device manager it will show under libusb class. Here is some supporting link




Now if i want to revert back to old driver, i tried to uninstall and delete the mkII driver(libusb), then reinstalled avrstudio again. But nothing happened. No driver found for mkII.

Now i found this blog with similar issue, they were using a debugger from freescale using jungo based usb driver changed to libusb. The part i was missing is jungo deiver install. In device manager there should be component “Jungo driver” permanently in the list whether any debugger attached to port or not. I got the location of the driver in “C:\Program Files (x86)\Atmel\AVR Tools\usb64” mine is 64 bit OS it may be usb for x86

Now another trick about how to install the driver, right click computer name in device manger then choose “add legacy hardware”. Select manually find the driver select all driver(dont srelect any specific) now choose “have a disk” . Now show the path to the folder containing windrv6.sys now it will install Jungo windriver. Now if you have avr studio installed plugin the programmer mkII, it will automatically install the mkII driver.


Published by


Hello, I am Asim admin of this blog. An expert in Scientific Instrumentation (Analytical Instrumentation). My works are always associated with both Physics and electronics. Currently working on ARM based embedded systems for Optical(UV and Visible) and electrochemical spectroscopy (EIS). My M.Tech. Thesis was related to all these things. I had worked for a 8 bit microcontroller based standalone EIS (electrical impedance spectroscopy) device. I have Masters in Instrumentation engineering from NIT Kurukshetra,Haryana and Masters in Electronics Science from Sambalpur University, Odisha (Formerly Orissa/Utkal) Am also work for PHP MySQL AJAX based CMS design. i love blogging and coding(am not an expert).

Leave a Reply